ACTi TCM-7011, Hardware User Manual

Page: 19 / 24

www.acti.com
TCM-7411 Hardware User’s Manual
19
Product Specification
TCM-7411
Device Micron Progressive Scan CMOS
Size 1/3 inch
Effective Pixels 1280(H) x 1024 (V)
Color Color mode automatically switched to B/W mode under 4 Lux
B/W 0.05 Lux at F1.0 (2400 °K, 30 IRE)
CDS Sensor Yes
IR Sensitivity from 700nm to 1100nm
Lens f3.3mm~ 12mm/ F1.6
Viewing Angle 89.8º ~ 23.9º (Horizontal)
X (Panning) 0º ~360º
Y (Tilting) 0º ~180º
Z (Rotating) 0º ~360º
Synchronization Sync. System Internal
Day/Night
functions Mechanical IR Cut
Filter
Yes
Motion Detection Yes (3 Windows)
Electronic shutter 1/5 ~ 1/15,000 sec
Fixed Shutter (Manual)
1/30 ~ 1/1,000 sec. (60Hz)
1/25 ~ 1/1,000 sec. (50Hz)
Flickerless
1/120 sec. (60Hz)
1/100 sec. (50Hz)
BLC Yes
AGC Automatic (User defined)
White Balance Auto, Indoor1, Indoor2, Outdoor1, Outdoor2, Hold Current, Manual
Wide Dynamic Range Yes
S/N Ratio S/N Ratio Better than 44 dB
Compression H.264/ MPEG-4 SP/ MJPEG simultaneous dual streams selectable
Picture Resolution
SXGA (1280x1024)
HD 720 (1280x720)
VGA (640x480)
QVGA (320x240)
QQVGA (160x112)
Bit Rate 28K ~ 6M bps
Image Frame Rate 18 fps at SXGA; 26 fps at HD720; 30 fps at VGA; 30 fps at QVGA; 30 fps at QQVGA
Compression 8kHz, Mono, PCM
Audio Line Input Unbalanced, 1.4Vp-p, 1Vrms, terminal block
Compression 8kHz, Mono, PCM
Audio Line Output Unbalanced, 1.4Vp-p, 1Vrms, terminal block
Digital Input 1, TTL, Terminal Block
Digital Output 1, TTL, Terminal Block
Reset Button Factory Default
LED System status/ Fan / Heater
IP66 Rated Weatherproof casing with IP66 standard
Vandal Proof Vandal proof supports, durability up to 659.23 KgF
Mount Types Surface / Flush / Wall
Ethernet Ethernet(10/100 Base-T), RJ-45 connector
Protocol
TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, DNS, DDNS, NTP, ICMP,
ARP, IGMP, SMTP, FTP, UPnP, IPv6
Web Browser Microsoft Internet Explorer 6.0 or above
SDK ACTi SDK-10000
Security Password Protection: Configured by the Administrator
Heater/ Fan Yes (Built in)
Temperature -30 ºC ~ 50 ºC (-22 ºF ~ 122 ºF) for DC 12V; -5 ºC ~ 50 ºC (7 ºF ~ 122 ºF) for PoE
Power Requirement PoE (IEEE 802.3af) with Class 3
Power Consumption
4.8 W (DC 12V) w/o Heater & Fan
13.68 W (DC 12V) w/ Heater ON & Fan ON
6.24 W (PoE) w/o Heater & Fan
7.68 W (PoE) w/ Fan ON*
Dimensions (Ø xH)
151.69 mm x 114.9 mm (6.0” x 4.5”)
Weight 1040 g (2.29 lb)
Approvals Certificate CE, FCC, IP66
* PoE cannot support Heater.
Physical
Software
Power
Min. scene
Illumination
Camera Angle
Adjustment
Operating
Image
Network
Casing
Lens
Functions
Video
Compression
Alarm
Audio Input
Audio Output
External I/O