![background image](http://html1.mh-extra.com/html/acti/r71cf-31/r71cf-31_user-manual_2842495009.webp)
www.acti.com
User
’s Manual
9
Thank you for purchasing ACTi products. The following documentation covers the installation and
configuration of your device.
NOTE:
The accuracy of the analytics algorithm may be affected by different environmental
factors or inappropriate installation. Please follow the procedures in this guide. ACTi will
not be held liable for inaccuracies resulting from the aforesaid causes.
1. Installation and Connections
Installation Environment
If installing the device indoors, the device should be at least 2 meters away from the light,
and at least 3 meters away from the window or the door.
If installing the device outdoors, you should apply silicone sealant to protect the cable
wiring area to keep raindrop from entering.
Make sure the environment illumination is more than 100 Lux.
NOTE:
For more details about the installation environment, see
on page 29.
Installing with Gang Box
The device can be directly installed on a wall with gang box.
1. According to the Datum line on the drill template, stick the drill template on the surface at
1.4 meters higher than the ground.