background image

 

27 Bank Street Meadowbank NSW 2114 Australia 

Tel: +61 2 9809 0588    Fax: +61 2 9809 2446   email: [email protected] 

ACE-Converter  

                         

ACE-Converter         

Installation Guide 

 
 
 

General 

 
The CS Technologies ACE-CONVERTER controller is a 
small, low-cost interface between the CS Technologies 
‘Silicon Key’ and a wide range of security equipment. It 
produces either a ‘Wiegand’ or ‘Clock and Data’ output. 
 
Inside each Silicon Key is a unique serial number – laser-
engraved on a silicon chip, and guaranteed to be unique 
world-wide. The ACE-Converter transmits this unique 
number as either 
-

 

a 10-digit BCD-format ABA-encoded clock and data 
string (magstripe format) 

-

 

a 34-bit Wiegand string (data 1/data 0) 

 
The converter can be used to interface to CS Technologies 
mag-stripe or Wiegand controllers, as well as other access 
control systems. Note that there is no ‘site code’ transmitted; 
the number used is the unique serial number engraved on the 
key. CS Technologies also manufactures a version of the key 
which is programmed with a site code and card number, and 
which transmits a 26-bit Wiegand format string; this may be 
more suitable for for applications where a site code is 
required. 

 
 
 

 
 

 
Features 

 

‰

 

Dedicated single-purpose controller; no programming 
necessary. 

‰

 

Easy installation 

‰

 

On-board link selects either wiegand or clock-and-data 
output 

‰

 

Operates from 12VDC or 5VDC supplied by security 
panel; no additional power supply required 

‰

 

Allows the durable Silicon key and reader to be used with 
other security panels 

‰

 

Extremely reliable operation 

‰

 

100% Australian made and designed 

 
 
 
Specifications 

 
Power supply 

12VDC or 5VDC 

Current Consumption: 

50mA max (controller only) 

 

 

Temperature range: 

0

°

C to 70

°

Humidity range: 

0 to 95% relative non-condensing

 

 

Dimensions: Box: 

86x66x30mm 

 Board: 

80x60x28mm 

Shipping weight: 

300g 

Housing: 

High impact ABS plastic box 
with bulkhead mounting lugs 

 

 

Reader interface 

Silicon Key (one-wire) interface 

 

 

Output Link-selectable 

a)

 

10-digit clock and data ABA 
format data (link OFF) 

Start sentinel, 10-digit number, 
end sentinel and LRC 

 b)

 

34-bit wiegand data (link 
ON) 

Start bit, 32-bit unique ID, end bit

 

 

 

 

 

Summary of Contents for ACE-CONVERTER

Page 1: ...so manufactures a version of the key which is programmed with a site code and card number and which transmits a 26 bit Wiegand format string this may be more suitable for for applications where a site code is required Features Dedicated single purpose controller no programming necessary Easy installation On board link selects either wiegand or clock and data output Operates from 12VDC or 5VDC supp...

Page 2: ...d format output IN3 DATA0 and IN4 DATA1 Configuring the converter The converter has a small link labelled LK5 This link should be OFF to transmit in Clock and Data format or ON to transmit in Wiegand format Configuring a CS Controller If using the converter with a CS controller the firmware in the controller should be either Magstripe or Wiegand firmware With magstripe firmware set the card option...

Page 3: ...t 2 LK19 LK18 ON Reader on Port 3 or 4 LK17 LK8 ON SOFTWARE Set the controller type as CARD Set the reader type as WIEGAND Clock Data Format CONTROLLER Set appropriate controller links LK19 LK18 LK17 LK8 LK20 OFF LK21 DOWN LK22 UP V 5 volts Reader on Port 1 no link changes Reader on Port 2 LK19 ON Reader on Port 3 or 4 LK17 ON SOFTWARE Set the controller type as KEY Set the reader type as CLOCK DA...

Page 4: ...ters If you rev ers e t he relay cont act make t he relay normally open connec t the YELLOW cabl e Red LED to t he c ont roller LED pin instead of the blue c able Wiegand Clock Data DATA1 DATA DATA 0 CLOCK LED LED GROUND GROUND LK6 READER 1 0V NO2 C2 NC2 0V NO1 C1 NC1 12V 0V FT FT GND I O 0V IN1 LED1 V 0V IN2 LED2 V 0V IN3 IN4 5V 1 READER 2 IN1 IN2 IN3 IN4 2 EXIT REQ LK1 Fire Trip Link must always...

Reviews: