www.acti.com
Hardware Manual
14
Step 2: Attach the Camera
1.
Insert the bundled flush mount through the end of the camera cable with the yellow tape
facing the camera side.
2.
Screw the flush mount to the camera according to the depth of the wall.
3.
When the correct depth is reached, make sure the flat area on the lens module is aligned
with the set screw holes (either upward or downward). The flat area indicates the correct
viewing orientation of the camera. Then, attach the set screw to one of the screw holes on
the flush mount to fix the camera position.
Depth of wall
