![background image](http://html1.mh-extra.com/html/acti/gnr-410/gnr-410_quick-installation-manual_2842594005.webp)
Standalone NVR Quick Installation Guide
5
CONNECT THE DEVICES
The example below displays a network consisting of only GNR, network cameras
and required peripherals. Please remember to enable the DHCP service on your
router for GNR to obtain an IP address automatically.
Note
To assign a static IP address to GNR, enter
Windows and configure the network
settings in
Network and Sharing Center
.
START-UP
ATTACH THE FRONT COVER
After you finish configuring GNR system, remember to lock the disk trays using the
provided keys and attach the front cover to the unit’s front panel.
Step 2
Press the latch and push the right end towards
Step 1
Align the left end hooks
to the holes on the unit’s
left handle.
1. On the unit’s rear panel, press down the Power Switch
to the side with “
l
” mark.
2. On the unit’s front panel, press down Power Button to turn on the unit.
3.
As this unit starts up, you will enter Windows logon screen, and input the
password “
123456
“ to log in as administrator.
the unit’s right handle
until it clicks into place.
Without Front Cover
With Front Cover
Power Source
eSATA Storage
USB Devices
Monitor
Switch
Cameras