ENR-
100 Series System Administrator’s Manual
(C) Motion Settings
After
selecting the camera, click “
Motion Detection Settings
”. If this camera is in dual
stream mode, only
Channel ID 1
(Stream 1) supports motion detection feature. On
Motion
Detection Settings
window, check “
Enable
” then click “
Motion Setup
”. To enable one
motion region, check it, a color frame will appear in the view. You may start setting the
detection area by adjusting this yellow frame on the view. Simply use your mouse to move
and resize the frame. Click “
Apply
” to save the settings.
Field Name
Description
Sensitivity
(0-100%)
Determines how sensitive the camera reacts to the movement. The higher the
sensitivity level is, the smaller motion will trigger the alarm, but may give false
alarms. Default is 70%.
Timer
(0-300 secs)
The interval before the next motion detection can be triggered again.
Default is 1 second.
Threshold
(0-100%)
The threshold level of this motion detection region. The lower threshold level
is, smaller portion of the region would be considered as motions, which is
more easily to be triggered, but may give more false alarms.
Default is 10%.
To move the entire frame
Place the mouse cursor over the
title bar
, and drag to move.
To adjust the region dimension
Place the mouse cursor over the
bottom right corner
, and drag to
resize.
To disable this
detection region
Place the mouse cursor
over the
upper right
corner
, and click the “
x
”
to close this frame.
1
2
3
