ENR-
100 Series System Administrator’s Manual
Installation
The installation procedures may vary depending on your site conditions. The procedures
provided in this manual are based on an example consisting of (1) local network, (2) an ENR
unit, (3) ACTi network cameras, (4) a POE network switch and (5) necessary peripherals.
Prepare the Devices
Before starting connecting all the devices together, please read the instructions below to
make sure your devices are ready for ENR system.
Cameras
ENR is able to automatically add the connected cameras then immediately displays their live
streams without your further configurations. Please fulfill the conditions below to make sure
your cameras are ready for ENR
Auto Add
function:
1.
For a camera whose settings have been changed from factory default, make sure
its output stream is
H.264 encoder type
,
2.
The
camera’s connection type is
Dynamic mode
(DHCP Client). You can configure the
this connection settings via
Web Configurator
.
If your camera is an other
brand’s product or you would like to add more streams from a
device, use
Search Cameras
provided by
Camera Setup Wizard
.
( ACTi camera web configurator interface)
