ENR-
100 Series System Administrator’s Manual
Change Camera Settings
After the cameras are added, you may change their properties on
Camera
tab.
(A)
Video format and transmission properties
(B)
Video adjustment
(C)
Motion Detection settings
(A) Video Format and Transmission Properties
To modify the video format and transmission properties including
Channel ID
,
Resolution
,
Frame Rate
,
Protocol
, and
Bitrate
, you will have to click
first to sync with the camera first. After
configuration, click “
Save
” to save this setting to
camera
A
V
B
V
C
V
Note
1.
Changing the video resolution will reset your current motion region settings. Please
re-configure the settings later.
2.
For local display viewing, please DO NOT (1) change the video resolution to higher
than 4M pixels or (2) change the video codec to MJPEG or MPEG4, for these types of
video streams are only displayable through ENR web interface.
