www.acti.com
Hardware Manual
9
Physical Description
1)
Reset Button
Use the Reset Button to reset the camera to its factory default settings. While the camera is
powered on, press and hold the Reset button for 5 seconds or until the Power LED lights up.
2)
Power LED
The Power LED lights up when the camera is connected to the power source and the camera
starts the boot up process. Then, the Power LED goes off when the boot process is complete.
3)
Ethernet Port
Use the Ethernet Port to connect the camera to the Ethernet via a standard RJ45 connector.
See
Basic Connections
on page 23 for more information.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299