www.acti.com
Hardware Manual
18
3.
Secure the clamping nut to the body.
NOTE:
Make sure the clamping nut is tight to avoid possible water leak.
Step 4: Connect the Ethernet Cable
1.
Connect the Ethernet cable to the Ethernet port inside the camera.
2.
When done, close the back cover by tightening the three (3) screws.
NOTE:
Make sure the rubber ring on the cover is secured and the screws are
completely tightened to avoid possible water leak.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
