![background image](http://html.mh-extra.com/html/acti/e33/e33_hardware-manual_2842392014.webp)
www.acti.com
Hardware Manual
14
Waterproof Cable Installation
The camera and the pre-installed network cable are resistant to salt water, weak acid, alcohol,
oil, grease and other common solvents. However, in areas with fierce weather conditions and
those that can easily be flooded, ensure that the exposed length of cable is also protected.
It is recommended to use a flexible conduit with
1/2”
diameter and the conduit gland (included
in the package) to protect the camera cabling. In this case, the pre-installed network cable with
“pigtail” (female connector) must be replaced with a standard Ethernet cable
NOTE:
The flexible conduit and Ethernet cable are not included in the package and must be
sold separately. When purchasing, make sure the flex conduit size is 1/2" to match the bundled
conduit gland.
To do the waterproof cable installation, also prepare the following tools:
Screwdriver
Wrench
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299