background image

 

1-3

(Point-to-Point over Ethernet) which has excellent transmission speed 
and enables the CAM-7200 series to connect to an ADSL or a cable 
modem. 

z

 

DDNS Supported 

The CAM-7200 series supports DDNS (Dynamic Domain Name 
Server), users can set the CAM-7200 series at a virtual domain name 
(such as cam1.Taipei.xxx) at dynamic IP. Everyone can use the virtual 
domain name to view the video anywhere that has the access to the 
internet. 

z

 

Build-in Hardware Motion Detection 

No more external motion sensors are required. Each CAM-7200 series 
can be set up to 3 detection areas. By tuning the object size and 
sensitivity, it is very reliable to fit into your environment. Besides, 
hardware motion detection delivers better sensitivity and responds 
faster than software motion detection.   

z

 

Bundle Powerful Surveillance Software 

To extend the capabilities of the CAM-7200 series, a powerful 
surveillance program is included in the package and is very free to use. 
Users can easily utilize the existing PC to be a digital video recorder. 
Schedule recording and manual recording keep every important image 
recorded in the local hard disk. Reliable and accurate motion detection 
with instant warning makes you responsive in every condition. Quick 
and simple search and playback function lets you easily find the 
images you want. 

z

 

Software Development Kit Support 

The CAM-7200 series can be integrated or controlled by user’s 
application program through the Streaming Library or ActiveX control. 
With its high level programming interface, software developer’s time 
and efforts to is highly reduced. 

 

 

 

 

 

 

 

 

 

Summary of Contents for CAM-7200 series



























Reviews: