1-10
8.
Reset Button
Step 1:
Switch off IP camera by disconnecting the power cable
Step 2:
Using a suitable pointed object, press and continue to hold
the Reset Button depressed. While continuing to hold the
reset button depressed, reconnect the power cable.
Step 3:
Keep holding the reset button depressed around 6 seconds,
release the reset button. The unit will start up with factory
default settings
9.
Cable Exit
These cable exits are used for cables to go through. Please cut it
with tools.
10.
Zoom Lever
Move this lever to adjust the optical zoom. After adjusting, rotate
it clockwise to fix it.
11.
Focus Lever
Move this lever to adjust the Focus. After adjusting, rotate it
clockwise to fix it.
12.
CCD Functions DIP-switch
z
Auto Electronic Shutter Speed Mode
AES On: 1/50 (60) sec. ~ 1/100,000 sec;
AES Off: 1/50 (60) sec.
PIN NAME
DESCRIPTION
1 GND
Ground
Pin
2 MIC
MIC
signal
Item Description ON
OFF
F.L. Flickerless
Default
AGC
Auto Gain Control
Default
BLC Backlight
Compensation
Default
AES
Auto Electric Shutter
Default
