1-8
DO: To Trigger Logic Level 0: 0.1~0.6V; Normal Logic Level1:
2.4~5V
2.
Power Input
Please use DC12V power Input. Please follow the description on
the connector to connect to power.
3.
Analog Video Output
The CAM-7200 series supports one channel analog video output.
4.
WAN port
The IP Camera connects to the WAN (wide area network) via a
standard terminal block. Supporting NWAY, this IP camera can
auto detect the speed of local network segment
(10Base-T/100Base-TX Ethernet). The WAN port is for FTTH
and can connect to an xDSL or cable modem.
The Network connector is Terminal block instead of RJ-45 port,
please based on the label color on the connector to connect.
With PoE built-in product, you can power the IP camera via
WAN port, LAN port or DC input. You can power the IP camera
with multiple power inputs at the same time. If you do, the IP
PIN NAME
DESCRIPTION
1 12V
Power
Input
2 GND
Ground
Pin
NOTE:
Please be careful while you do cabling
arrangement for network cable. It might cause the
network to fail (some lines of cable might be broken).
