the same time. If you do, the IP rugged dome will gets the power from the first
power input plugged into it.
3.
Analog Video Output
The IP rugged dome supports one channel analog video output.
4.
LAN port
The IP rugged dome connects to the LAN (local area network) via a standard RJ45
connector. Supporting NWAY, this IP rugged dome can auto detect the speed of
local network segment (10Base-T/100Base-TX Ethernet).
With PoE built-in product, you can power the IP rugged dome via WAN port, LAN
port or DC input. You can power the IP rugged dome with multiple power inputs at
the same time. If you do, the IP rugged dome will gets the power from the first
power input plugged into it.
5.
Audio Input
Unbalanced, 1.0Vpp, 1Vrms, 3.5mm Jack
6.
Reset Button
Step 1:
Switch off IP rugged dome by disconnecting the power cable
Step 2:
Using a suitable pointed object, press and continue to hold the Reset Button
depressed. While continuing to hold the reset button depressed, reconnect the
power cable.
Step 3:
Keep holding the reset button depressed around 6 seconds, release the reset
button. The unit will start up with factory default settings.
7.
Action LED Indicator
The LED will light up after IP rugged dome has successfully completed the boot
process.
8.
DI/O
The IP rugged dome supports one alarm input and one alarm output.
DI:Logic Level 0: 0~0.4V; Logic Level 1: 3.3~30V
DO:Logic Level 0: 0.1~0.6V; Logic Level1: 2.4~5V
NOTE:
You may find a support package for help you getting
familiar with PoE. Please visit our web site, and get the support
document TS-00040.
NOTE:
You may find a support package for help you getting
familiar with PoE. Please visit our web site, and get the support
document TS-00040.
