1.2 PHYSICAL DESCRIPTION
Rugged Dome Rear Panel
1.
WAN port
The IP rugged dome connects to the WAN (wide area network) via a standard RJ45
connector. Supporting NWAY, this IP rugged dome can auto detect the speed of
local network segment (10Base-T/100Base-TX Ethernet). The WAN port is for
FTTH and can connect to a xDSL or cable modem.
With PoE built-in product, you can power the IP rugged dome via WAN port, LAN
port or DC input. You can power the IP rugged dome with multiple power inputs at
the same time. If you do, the IP rugged dome will gets the power from the first
power input plugged into it.
2.
Power Input
DC 12V input.
PIN
NAME
DESCRIPTION
1
12V Power Input (DC +12V)
2
GND Ground Pin of Power Input
3
X
No Connection
With PoE built-in product, you can power the IP rugged dome via WAN port, LAN
port or DC input. You can power the IP rugged dome with multiple power inputs at
NOTE:
You may find a support package for help you getting
familiar with PoE. Please visit our web site, and get the support
document TS-00040.
