A C T G L O B A L . C O M / S P O R T S - T U R F
|
E M A I L :
S P O R T S @ A C T G L O B A L . C O M
MAINTENANCE MANUAL
25
Recommended Installation
Procedures
Since removable systems spend over 90% of the surfaces
life rolled up and in storage it is imperative that proper
storage procedures and methods be followed. For more
information on storage, see the section on Storage below.
Act Global makes every effort to construct your surface
for storage and use. Surfaces will require time to breath
and relax before attachment of the Velcro system. The
following procedures should be followed to ensure the
proper re-installation of the Act Global sports surfacing
system:
1. Starting at the furthest entrance from the playing
surface the rolls should be placed and unrolled.
2. As the rolls are placed they should be rolled out inde-
pendently, then floated onto the previous roll. Each
roll should overlap the previous roll by just less then
50% of the rolls width.
3. 3. Once all the rolls are placed to breath, the sur-
face should be allowed to breath for a minimum of 4
hours.
4. At the completion of the breathing period the last
roll to be placed should be floated back to the first
position in front of the playing surfaces entrance. All
equipment should be off the playing surface area
prior to starting this procedure.
5. All green ad panel blanks should be removed as the
rolls are placed into there final position. The green ad
panels can then be stored, until the surfaces use is
complete, and then reinserted for storage again.
6. Each seam as it is attached should be checked for
a professional fit to ensure proper appearance and
above all player safety.
7.
Once the entire surface has been fit into place the ad
panels should be inserted properly. Each custom Ad
Panel should be checked for proper fit and to above
all ensure player safety.
8. The installation of your Act Global removable surfac-
ing system is now complete.
9. The facility staff should now trouble shoot the playing
surface to ensure player safety.
10. Troubleshooting: Any ripples, echo ripples, or devia-
tions should have applied and sustained pressure to
force the playing surface level. These types of devia-
tions in playing surface level, are caused by improper
storage methods, and or improper surface removal
from the previous use.
Note
Player safety is the ultimate requirement of the facilities
installation staff. Playing conditions of any sports sur-
face is the number one priority. If your facilities staff has
any questions or experiences any concerns they should
contact your local Act Global representative immediately
for assistance.
