Suburban Dynaline 3 A&E Manual 12/2021 Rev.2
37
For Senior Housing,
Hotels/Motels,
Apartments And
Other Applications
Elderly senior housing and assisted living facility
residents require controlled cool summers and warm
winters. Because typical systems don’t readily adapt
to extremes in temperature, warmer, dry gas heat is
preferred for its therapeutic effect on residents’
respiratory systems. Electric cooling, in turn, is
preferred for its rapid response to adjustments.
Housing for seniors and the elderly remains expensive
because of the necessity for near-hospital-quality
security and facility extras not required in normal
residential housing. Dynaline 3 adds the option of
lowering utility expenses by using economical gas
heating with electric cooling units.
Low Heating Amp Draw —
The Dynaline 3
consumes about 1 amp during the heating cycle;
while all-electric PTACs consume much more. In
the event of a power failure, less power is used by
the Dynaline 3 so the standby generator can be
downsized, thus reducing construction costs.
Compressor Lock-Out —
The standard design
provides means of locking out the A/C compressor
when the standby power generator is operating.
The electronic control board has 24V input
terminals to receive the lock-out signal.
Better Comfort for Residents —
Faster
increase in temperature than an all-electric unit.
Economical Gas Heat Provides Comfort to
Those Who Need it the Most
The Dynaline
™
3 Difference
Dynaline 3
provides warm
gas heat
In cooler climates, particularly, warm gas
heat is preferred. The 11.2 EER provides
high-efficiency air conditioning to cool
areas economically.
Dynaline 3 is
a versatile
PTAC
Four BTU/h capacities are available,
operating efficiently and economically in
zone systems. All have individual controls,
and operating costs can be controlled by
setting the control at a maintained,
desired comfort level, or interfacing into
an energy management system.
Dynaline 3 is
easy to install
Because of its compact size and standard
42" x 16" wall case, the Dynaline 3 can be
specified in new construction or as
replacement for obsolete electric
resistance or heat pump units.
Dynaline 3
fits any decor
The Dynaline 3 PTAC features a modern,
compact, and sleek design. Four standard
colors, stainless steel and custom options
to match any decor. Small and snug
against the wall, it complements any room
without commanding attention.
The Suburban Dynaline™3 is a Packaged Terminal Air Conditioner (PTAC) that combines economical gas heating and
high-efficiency electric cooling in one compact unit for zone temperature room-by-room control. By comparing the
operating costs of Dynaline 3 to heat pumps or electric resistance heat, a savings of hundreds of dollars per room
every year can be achieved.
Suburban Dynaline 3 A&E Manual 02/2019 Rev.2
37
