Versatile Feed Roll 5” Dia
CI0183670000
•
07-18-2019
28
Chapter 5:
Maintenance
5-1 General Maintenance Notes
Before ANY maintenance is attempted, ensure the following has been done:
•
TURN OFF AND LOCKOUT the power per OSHA 1910.147 OR ANSI Z244.1-1982 (Lockout/Tag
out of Energy Sources).
•
If it is not possible to lock out the power, have an electrician remove the fuses.
•
Make sure the rollers have come to a complete stop.
•
Wear gloves to protect against injury from the rollers or sharp material.
•
NOTE that the pneumatic circuit will default to the CLOSED position if the power is cut. This
means that, upon loss of power, THE ROLLERS WILL IMMEDIATELY CLOSE DUE TO GRAVITY.
•
Plan all maintenance to be done with the rollers in the CLOSED position.
5-2 Clearing a Jam
NEVER ATTEMPT TO FREE A JAMMED MACHINE BY PLACING YOUR HANDS INSIDE THE
ROLLING CHAMBER.
•
The rollers are accessible through the cover plates.
•
Rollers are locked in place naturally via the chain drive.
•
Ensure secure footing on a clean floor and keep your body well braced while prying on
the rollers. Guard against loss of balance should the jammed condition suddenly come
free.
•
Use pliers to remove material from the roller chamber, keeping in mind that the
removal of material may cause rotation of the rolls.
•
If prying on the rolls is unsuccessful, removal of the rolls may be required.
•
Close the roller chamber per instructions in Accessing the Rollers.
A malfunction of the machine, such as a jam, may cause undue strain or damage to any part.
Do not restart the machine after such a malfunction without checking to see whether damage
was done or whether settings were changed by the malfunction.
Summary of Contents for FRV Seroes
