7.1.5.
SET_NOTIFICATION
This command disables / enables the Card Status Messages transmitted by the reader to notify the
host computer of the insertion or removal of a card.
Command format
Instruction Code
Data length
Data
NOTIFY
06
H
01
H
NOTIFY
Specifies whether the Card Status Message shall be transmitted to notify the host
computer of card insertion / removal
01
H
: transmit Card Status Message
02
H
: do not transmit Card Status Message
Response data format
No
response
data
7.1.6.
SET_PPS_MODE
This command selects the PPS mode to be used
Command format
Instruction
Code
Data length
Data
PPS_Mode
07
H
01
H
NOTIFY
Specifies whether the Card Status Message shall be transmitted to notify the host
computer of card insertion / removal
00
H
: baud rate to/from the card is from 9600 bps to 115200 bps (default)
01
H
: baud rate to/from the card is at 9600 bps only
Response data format
No
response
data
Document Title Here
Document Title Here
Document Title Here
AET60 Reference Manual
Version 1.7
Page 18 of 24
www.acs.com.hk
