BioSIMKey - ADT60 Reference Manual
rev 1.0, April, 2002
Advanced Card Systems Ltd.
Page 21 of 26
8.2.2 POWER_OFF
This command powers off the card inserted in the card reader.
Command format
Instruction Code
Data length
81
H
00
H
Response data format
No response data
8.2.3 EXCHANGE_APDU
To exchange an APDU (Application Protocol Data Unit) command/response pair between the
MCU card inserted in the BioSIMKey and the host computer.
Command format
Instruction
Code
Data
length
Data
LEN
CLA
INS
P1
P2
Lc
BYTE 1
...2
...
BYTE N
Le
A0
H
LEN
Length of APDU command data, N, + 6 (0 < N
≤
MAX_R)
CLA
APDU instruction class byte
INS
APDU
instruction
P1
APDU parameter byte 1
P2
APDU parameter byte 2
Lc
APDU command data length
BYTE x
APDU command data
Le
Expected APDU response data length (Le = 0 menas no data is expected from
the card)
NOTE -
With the T=0 communication protocol it is not possible to transmit data to the card and from the card in a
single command-response pair. Hence, only either Lc or Le can be greater than 0 in an
EXCHANGE_APDU
command when a T=0 card is in the reader. If both parameters have a value greater than 0, the BioSIMKey does not
execute the command and returns an error status.
Response data format
BYTE 1
...
...
BYTE N
SW1
SW2
BYTE x
Response data from card (if any)
SW1, SW2
Status code returned by the card.
