BioSIMKey - ADT60 Reference Manual
rev 1.0, April, 2002
Advanced Card Systems Ltd.
Page 20 of 26
8.1.6 SET_PPS_MODE
This command selects the PPS mode to be used
Command format
Instruction Code
Data length
Data
PPS_Mode
07
H
01
H
NOTIFY
Specifies whether the Card Status Message shall be transmitted to notify the
host computer of card insertion / removal
00
H
: baud rate to/from the card is from 9600 bps to 115200 bps (default)
01
H
: baud rate to/from the card is at 9600 bps only
Response data format
No response data
8.2
Card Commands (MCU-based Card)
The available commands and the parameters specified in the card commands as well as the
data transmitted in the response from the BioSIMKey depend on the selected card type.
8.2.1 RESET
This command powers up the card inserted in the card reader and performs a card reset. If
the card is powered up when the command is being issued, only a reset of the card is carried
out. The power supply to the card is not switched off.
Command format
Instruction Code
Data length
80
H
00
H
Response data format
ATR
ATR
Answer-To-Reset as transmitted by the card according to ISO7816-3.
NOTE -
The ATR is only returned in the BioSIMKey response if the communication protocol of the card is compatible
with the reader, i.e., if the card can be processed by the BioSIMKey. Otherwise, the BioSIMKey returns an error
status and deactivates the smart card interface.
