ACR3801 – Reference Manual
Version 2.01
www.acs.com.hk
Page 6 of 62
3.0. Supported Card Types
3.1. MCU Cards
ACR3801 is a PC/SC compliant smart card reader that supports ISO 7816 Class A, B and C (5 V, 3 V,
and 1.8 V) smart cards. It also works with MCU cards following either the T=0 and T=1 protocol.
The card ATR indicates the specific operation mode (TA2 present; bit b5 of TA2 must be 0) and when
that particular mode is not supported by ACR3801, the reader will reset the card to a negotiable
mode. If the card cannot be set to negotiable mode, the reader will then reject the card.
When the card ATR indicates the negotiable mode (TA2 not present) and communication parameters
other than the default parameters, the ACR3801 will execute the PPS and try to use the
communication parameters that the card suggested in its ATR. If the card does not accept the PPS,
the reader will use the default parameters (F=372, D=1).
For the meaning of the aforementioned parameters, please refer to ISO 7816-3.
3.2. Memory-based Smart Cards
ACR3801 works with several memory-based smart cards such as:
•
Cards following the I2C bus protocol (free memory cards) with maximum 128 bytes page with
capability, including:
o
Atmel: AT24C01/02/04/08/16/32/64/128/256/512/1024
o
SGS-Thomson: ST14C02C/4C
o
Gemplus: GFM1K to 8K
•
Cards with secure memory IC with password and authentication, including:
o
Atmel: AT88SC153 and AT88SC1608
•
Cards with intelligent 1k bytes EEPROM with write-protect function, including:
o
Infineon: SLE4418, SLE4428, SLE5518 and SLE5528
•
Cards with intelligent 256 bytes EEPROM with write-protect function, including:
o
Infineon: SLE4432, SLE4442, SLE5532 and SLE5542
•
Cards with ‘104’ type EEPROM non-reloadable token counter cards, including:
o
Infineon: SLE4406, SLE4436, SLE5536 and SLE6636
•
Cards with Intelligent 416-Bit EEPROM with internal PIN check, including:
o
Infineon: SLE4404
•
Cards with Security Logic with Application Zone(s), including:
o
Atmel: AT88SC101, AT88SC102, AT88SC1003
