ACS ACR3801 Reference Manual Download Page 8

Page: 8 / 62

ACR3801 – Reference Manual

[email protected]

Version 2.01

www.acs.com.hk

Page 8 of 62

5.0. Power Supply

ACR3801 requires a voltage of 5 V DC, 100 mA, regulated, power supply. ACR3801 gets the power

supply from the computer (through the cable supplied along with each type of reader).

5.1. Status LED

The LED indicates the activation status of the smart card interface:

•

Flashing slowly (turns on 200 ms for every 2 seconds)

Indicates ACR3801 is powered up and in the standby state. Either the smart card has not

been inserted or the smart card has not been powered up (if it is inserted).

•

Lighting up

Indicates power supply to the smart card is switched on, i.e., the smart card is activated.

•

Flashing quickly

Indicates there are communications between ACR3801 and smart card.

Summary of Contents for ACR3801































































Search results

Summary of Contents for ACR3801

Reviews:

Related manuals for ACR3801

Brands by name

Popular brands

ACS ACR3801, Reference Manual

Search results

Summary of Contents for ACR3801

Reviews:

Related manuals for ACR3801

Brands by name

Popular brands