Technical manual
BA 1118
Filling level
SAT
Electrode probe
for conductive limit level detection
in electrical conductive liquids
Detects up to six limit values simultaneously
Useable
for leakage or overflow protection in container
for minimum, maximum resp. multilevel detection in container
as pump protection, resp. dry run protection in pipelines
for two-position-control of pumps
Wide application range
for conductivities higher than 1 µS/cm
for process temperatures from -15 °C to +150 °C
for process pressures from -1 bar to +10 bar
materials also for aggressive filling material
ATEX II 1 G Ex ia IIB/IIC T6
…T1 Ga
Certification for the use in explosion hazardous areas
Integrated wire break monitoring
L a u t e r b a c h s t r . 5 7
– 8 4 3 0 7 E g g e n f e l d e n – G e r m a n y
T e l : + 4 9 8 7 2 1 / 9 6 6 8 - 0
– F a x : + 4 9 8 7 2 1 / 9 6 6 8 - 3 0
i n f o @ a c s - c o n t r o l s y s t e m . d e
–
w w w . a c s - c o n t r o l s y s t e m . d e
