Restoring a disk (partition) from an image
Copyright © Acronis, Inc., 2000-2005
33
Select a partition to restore
During a single session you can restore several partitions or disks, one by one by
selecting one disk and setting its parameters first and then repeating these actions
for every partition or disk to be restored.
Select the necessary partition and click
Next
.
5.4
Selecting a location to restore to
As a rule you should restore image to the same partition that the image was created
from.
You can restore an image to another partition, but this is needed rather seldom. At
that a partition should be of at least the same size as uncompressed image data.
If you don’t have a special reason to restore an image to another partition, restore
it only to partition that was used to create the image.
Select partition to restore image to
All the data stored on the restored partition will be replaced by the image data, so be careful
and watch for non-backed up data that you might need.
