ACRONIS TRUE IMAGE 8.0 User Manual Download Page 97 | Manualshive

Page: 97 / 97

background image

Troubleshooting

Copyright © Acronis, Inc., 2000-2005

97

Ahead InCD — available on Nero website freely for Ahead Nero Burning Rom users
(usually bundled with Nero);
Veritas DLA and all its OEM versions (e.g. HP DLA);
Pinnacle InstantCD/DVD.
In general the program also supports all other DVD UDF burst recording software,
but the aforementioned applications was tested by Acronis for compatibility with
Acronis True Image Enterprise Server .
To enable image recording to DVD in Acronis True Image Enterprise Server you
should do the following:
Install DVD UDF recording software;
Format DVD discs. DVD+RW and DVD-RW discs can be formatted in any of the
aforementioned applications, while DVD+R formatting is currently supported by
Roxio DirectCD only;
Run Acronis True Image Enterprise Server , insert formatted DVD disc into your
DVD+RW or DVD-RW drive and create an image. No other special actions are
required.
Images stored on DVD discs can be restored from both under Windows, and when
Acronis True Image Enterprise Server is loaded from its bootable media.
Besides, there’s another way to burn an image to a DVD disc. Using Acronis True
Image Enterprise Server you can create a hard disk image on your hard disk to burn
it using the installed DVD recording application to a DVD disc afterwards. You will
be able to restore images from such discs from both under Windows, and when
Acronis True Image Enterprise Server is loaded from the bootable media.

13.3 Technical

support

Users of legally purchased copies of Acronis True Image Enterprise Server are
entitled to free e-mail technical support from Acronis. If you have installation or
working problems that you can’t solve by yourself using this manual and the
readme.txt file, e-mail the technical support team.
Before you do this, you will have to register your copy at

http://www.acronis.com/registration/

or by mail.

When e-mailing technical support, you must provide the registration number of your
Acronis True Image Enterprise Server copy, bundled with the program.
For more information visit

http://www.acronis.com/support/

Technical support email address:

[email protected]

.

Acronis Inc.,

395 Oyster Point Boulevard, Ste 115
South San Francisco, CA 94530
http://www.acronis.com
[email protected]

«
...
95
96
97

Summary of Contents for TRUE IMAGE 8.0


































































































Reviews:

No comments

Related manuals for TRUE IMAGE 8.0

Brand: NEC Pages: 81

Brand: TANDBERG Pages: 66

Content Server None

Brand: TANDBERG Pages: 14

NETWORK SATELLITE SERVER 4.0.5

Brand: Red Hat Pages: 82

Brand: Sun Microsystems Pages: 38

ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI MAIL SERVER

Brand: KAPERSKY Pages: 295

Brand: Siemens Pages: 11

Brand: Siemens Pages: 28

Brand: Siemens Pages: 32

OpenScape Xpressions PhoneMail

Brand: Siemens Pages: 110

Brand: LinPlug Pages: 46

Brand: Juniper Pages: 24

JUNOS OS 10.3 - SOFTWARE

Brand: Juniper Pages: 3946

Brand: M-Audio Pages: 15

Brand: 10ZiG Technology Limited Pages: 125

1210SA - Serial ATA RAID Controller

Brand: Adaptec Pages: 88

Software Desktop Monitor

Brand: Intel Pages: 4

Brand: Altigen Pages: 502

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands