ACRONIS TRUE IMAGE 8.0 User Manual Download Page 75

Page: 75 / 97

Scheduling

Specify periodicity in the

Every

weeks

(each week, in a week, etc.)

Check weekdays to execute the task on.

You can execute the task even if your server is turned off at the specified time. To
do this select

Perform this task when the computer restarts, only if the

computer was turned off at the selected time

. In this case the task will be

executed at the nearest startup.

10.1.5 Setting

up monthly execution

If you select the monthly execution, you will have to specify some additional
parameters. First, the

Start time

(hours and minutes).

In the

Perform this task

group select time to execute tasks on:

Day

– on the specified date.

The...

– on the specified weekday (e.g. second Tuesday or fourth Friday); selected

from drop-down lists.

Summary of Contents for TRUE IMAGE 8.0


































































































Search results

Summary of Contents for TRUE IMAGE 8.0

Reviews:

Related manuals for TRUE IMAGE 8.0

Brands by name

Popular brands

ACRONIS TRUE IMAGE 8.0, User Manual

Search results

Summary of Contents for TRUE IMAGE 8.0

Reviews:

Related manuals for TRUE IMAGE 8.0

Brands by name

Popular brands