ACRONIS DISK DIRECTOR SUITE 10 User Manual Download Page 10

Page: 10 / 127

Installation and Use

To remove Acronis OS Selector only, select Start



Programs



Acronis



Acronis

DiskDirector



Install Acronis OS Selector. Then select Uninstall Acronis OS

Selector in the installation program window and follow the program instructions.

1.6

User Interface

When Acronis Disk Director Suite software is installed, it has a graphical user interface

that is controlled by the mouse or by

Tab

Shift+Tab

Left

Right

Down

Space

Enter

and

Escape

keys.

If you regularly work with Windows or X Window applications, you should not encounter

any problems with the Acronis Disk Director Suite interface.

Acronis Disk Director Suite uses a series of dialogs requiring the user to choose among

several actions or to mark partitions or disks to be manipulated.

1.7

Before You Run Acronis Disk Director Suite

PLEASE NOTE: Operations on system, application or data partitions must be done very

carefully to avoid potential hard disk booting or data storage problems.

Acronis Disk Director Suite has been thoroughly tested to work with numerous hard disks,

so if problems arise, they are likely caused by improper use, not the software.

A power loss, turning off the PC or pressing the

Reset

button

on your PC

during the

repartitioning procedure could result in partition damage and data loss.

Please take all necessary precautions and following these

simple rules

1. Create a disk image of the disk on which partitions are to be reconfigured. This will

ensure that your data will not be lost under any circumstances.

Almost all current PCs feature CD-RW drives. Having your most important data backed up

to a hard disk or CD will enable you to work on the disk partitions with full confidence that

your data is safe.

Acronis offers extremely effective hard disk and partition disk imaging software — Acronis

True Image

(visit

http://www.acronis.com/products/trueimage/

). It creates a backup stored

in a compressed archive file whose contents can be restored at any time.

2. Test your disk to make sure it

’

s fully functional and does not contain bad sectors or file

system errors.

You can invoke system hard disk checking tools directly from Acronis Disk Director Suite

by selecting

Disk



Check

or clicking

Check the selected partition for errors

toolbar

button.

Summary of Contents for DISK DIRECTOR SUITE 10
































































































































Search results

Summary of Contents for DISK DIRECTOR SUITE 10

Reviews:

Related manuals for DISK DIRECTOR SUITE 10

Brands by name

Popular brands

ACRONIS DISK DIRECTOR SUITE 10, User Manual

Search results

Summary of Contents for DISK DIRECTOR SUITE 10

Reviews:

Related manuals for DISK DIRECTOR SUITE 10

Brands by name

Popular brands