21
Copyright © Acronis, Inc., 2000-2010
If the
deploy /partition
command cannot find a partition in the image by its physical number, use the
partition:<number in the image> /target_partition:<physical number of the target partition>
keys.
For the above example, to restore partition 2-5 to its original place use:
/partition:2-2 /target_partition:2-5
If the
vault
option is specified the
filename
option is ignored.
vault:[path]
Specifies a path to the location whose archives you want to list. Along with archive names, it lists
Universally Unique Identifiers (UUID) that are used with the
arc_id
option.
The following locations are supported:
Local folders, e.g.:
/vault:C:\Test
, or
/vault:"C:\Test 1"
Network folders, e.g.:
/vault:\\ServerA\Share\
Managed vaults (for advanced product editions only), e.g.:
/vault:bsp://StorageNode/VaultName
FTP and SFTP, e.g.:
/vault:ftp://ServerA/Folder1
CD, DVD – with the path specified as a local path, e.g.:
/vault:F:\
Acronis Secure Zone, e.g.:
/vault:atis:///asz
Tapes, e.g.: /vault:atis:///tape?0
Unmanaged vaults are specified by their path. For example, if a vault is located in a folder,
specify the path to that folder.
If the
vault
option is specified the
filename
option is ignored.
arc:[archive name]
Used in combination with the
vault
option. Lists all backups contained in the archive.
If not specified, the
arc_id
option is used. If both the
arc
and
arc_id
options are specified, the
arc_id
option is used.
arc_id:[archive id]
Used in combination with the
vault
option. Lists all backups of the selected archive.
If not specified, the
arc
option is used. If both the
arc
and
arc_id
options are specified, the
arc_id
option is used.
1.1.3.11
explore
partition:[partition number]
Specifies a list of partitions to be mounted as virtual drives. Without this option, all partitions stored
in the image will be mounted.
To obtain the partition number for this option, list the image contents with the
/list/filename
command and use the number from the Idx column.
