12
Copyright © Acronis, Inc., 2000-2010
log:[file name]
Create a log file of the current operation with the specified file name.
log_net_user:[remote user]
If the log file is created on a network share, include the user name for logon to the share.
log_net_password:[password]
If the log file is created on a network share, include the password for logon to the share.
silent
Suppresses the command's output.
progress:[on | off]
Shows/hides the progress information (percent completed). It is shown by default.
1.1.3
Specific options
1.1.3.1
create
harddisk:[disk number]
Specifies the hard disks to include into the image file. The list of available hard disks is provided by
the /list command. An image may contain data of more than one hard disk. In that case, separate
disk numbers by commas, e.g.:
/harddisk:1,3
By specifying
/harddisk:DYN
you will back up all dynamic volumes present in the system.
partition:[partition number]
Specifies the partitions to include into the image file. The list of available partitions is provided by
/list
. Partition numbers are specified as
<disk number>-<partition number>
, e.g.:
/partition:1-1,1-2,3-1
Dynamic volumes are specified with the prefix DYN, e.g.:
/partition:DYN1,DYN2
Both basic partitions and dynamic volumes can be specified by their letters, for example:
/partition:"C"
Mixed notation is also acceptable, for example:
