48
Copyright © Acronis, Inc., 2000-2010
Managed vaults (for advanced product editions only), e.g.:
--
vault:bsp://StorageNode/VaultName
Network folders, e.g.: --
vault:smb://Server/Share/
FTP and SFTP, e.g.: --
vault:ftp://ServerA/Folder1
CD, DVD – with the path specified as a local path, e.g.: --
vault:/mnt/cdrom
Acronis Secure Zone, e.g.: --
vault:atis:///asz
Tapes, e.g.: --vault:atis:///tape?0
Unmanaged vaults are specified by their path. For example, if a vault is located in a folder,
specify the path to that folder.
target_arc:[target archive name]
The name of the target archive. Has to be unique within the target folder. If there is an archive with
the same name, the operation will fail.
2.1.3.9
list
filename:[filename]
With this option, the image contents are displayed.
When listing image contents, partition numbers may not coincide with those in the drives/partitions
list, if the image does not contain all the disk partitions. For example, if the image contains partitions
2-3 and 2-5, they will be listed as 2-1 and 2-2.
If the
--deploy --partition
command cannot find a partition in the image by its physical number, use
the
--partition:<number in the image> --target_partition:<physical number of the target partition>
keys. For the above example, to restore partition 2-5 to its original place use:
--partition:2-2 --target partition:2-5
If the
vault
option is specified the
filename
option is ignored.
vault:[path]
Specifies a path to the location whose archives you want to list. Along with archive names, it lists
Universally Unique Identifiers (UUID) that are used with the
arc_id
option.
The following locations are supported:
Local folders, e.g.: --
vault:/folder
, or --
vault:"/Folder 1"
Network folders, e.g.: --
vault:smb://Server/Share/
Managed vaults (for advanced product editions only), e.g.:
--
vault:bsp://StorageNode/VaultName
FTP and SFTP, e.g.: --
vault:ftp://ServerA/Folder1
CD, DVD – with the path specified as a local path, e.g.: --
vault:/mnt/cdrom
Acronis Secure Zone, e.g.: --
vault:atis:///asz
Tapes, e.g.: --
vault:atis:///tape?0
Unmanaged vaults are specified by their path. For example, if a vault is located in a folder,
specify the path to that folder.
