XMC-6260-CC
USER’S MANUAL
Acromag, Inc. Tel: 248-295-0310
- 19 -
http://www.acromag.com
- 19 -
www.acromag.com
Terminator 4 ASIC (U1)
P15 XMC Connector
Non-Isolated:
PCIe bus and field commons have a direct electrical
connection.
Radiated Field Immunity (RFI):
Complies with IEC 61000-4-3 with no
register upsets.
Conducted R F Immunity (CRFI):
Complies with IEC 61000-4-6 with no
register upsets.
Surge Immunity:
Not required for signal I/O per IEC 61000-4-5.
Electric Fast Transient (EFT) Immunity:
Complies with IEC 61000-4-4 Level 3
(1.0KV at field I/O terminals).
Electrostatic Discharge (ESD) Immunity:
Complies with EN61000-4-2 Level
3 (8KV enclosure port air discharge) Level 2 (4KV enclosure port contact
discharge).
Radiated Emissions:
Meets or exceeds European Norm 61000-6-3:2007 for
class A equipment. Shielded cable with I/O connections in shielded
enclosure is required to meet compliance.
The Chelsio fourth generation Terminator 4 ASIC is a 27x27mm 675-pin
FCBGA package with a 8-lane PCIe gen2 interface to the server and two XAUI
link MAC interfaces on the network side.
114 pin Samtec ASP-103614-05 connector complies with ANSI/VITA 42.3-
2006
P15 is the primary XMC connector
8 Gigabit differential pairs are provided for use as 8 lane PCIe Gen 2.0.
System Management (XMC provides hardware definition information read
by the external controller using IPMI commands and I2C serial bus
transactions.)
3.3V power (4 pins at 1A/pin)
Variable power (5V or 12V) (8 pins at 1A/pin)
