VPX4810 PCIe PMC/XMC 3U Carrier
USER’S MANUAL
Acromag, Inc. Tel: 248-295-0310
- 24 -
http://www.acromag.com
- 24 -
www.acromag.com
SERVICE AND REPAIR
Preliminary Service Procedure
Surface-Mounted Technology (SMT) boards are generally difficult to repair. It is highly recommended that a
non-functioning board be returned to Acromag for repair. The board can be easily damaged unless special SMT
repair and service tools are used. Further, Acromag has automated test equipment that thoroughly checks the
performance of each board. When a board is first produced and when any repair is made, it is tested, placed in
a burn-in room at elevated temperature, and retested before shipment.
Please refer to Acromag's Service Policy Bulletin or contact Acromag for complete details on how to obtain
parts and repair.
Before beginning repair, be sure that all of the procedures in the "Preparation for Use" section have been
followed. Also, refer to the documentation of your PMC module to verify that it is correctly configured.
Replacement of the board with one that is known to work correctly is a good technique to isolate a faulty
board.
WARNING: POWER MUST BE TURNED OFF BEFORE REMOVING OR INSERTING BOARDS.
Where to Get Help
If you continue to have problems, your next step should be to visit the Acromag worldwide web site at
. Our web site contains the most up-to-date product and software information.
Acromag’s application engineers can
also be contacted directly for technical assistance telephone through the
contact information listed at the bottom of this page. When needed, complete repair services are also
available.
