INDUSTRIAL I/O PACK SERIES AVME9675 VME64x 6U CARRIER BOARD
___________________________________________________________________________________________
- 19 -
APPENDIX
CABLE: MODEL 5028-187 (SCSI-2 to Flat Ribbon, Shielded)
Type: Round shielded cable, 50-wires (SCSI-2 male connector at
one end and a flat female ribbon connector at the other end).
The cable length is 2 meters (6.56 feet). This shielded cable is
recommended for all I/O applications (both digital I/O and
precision analog I/O).
Application: Used to connect Model 5025-552 termination panel to
the TRANS-200 Transition Module. The transition module then
connects to all four IP module slots to the rear of the AVME9670
or AVME9675-4 (Slots A-D). The AVME9675-2 uses IP slots
A-B.
Length: Standard lenght is 2 meters (6.56 feet). Consult factory for
other lenghts. It is recommended that this length be kept to a
minimum to reduce noise and power loss.
Cable: 50 conductors, 28 AWG on 0.050 inch centers (permits
mass termination for IDC connectors), foil/braided shield inside
a PVC jacket.
Connectors: (One End): SCSI-2, 50-pin male connector with
backshell and spring latch hardware.
(Other End): IDC, 50-pin female connector with strain
relief.
Keying: The SCSI-2 connector has a “D Shell” and the IDC
connector has a polarizing key to prevent improper installation.
Schematic and Physical Attributes: See Drawing 4501-758.
Electrical Specifications: 30 VAC per UL and CSA (SCSI-2
connector spec.’s). 1 Amp maximum at 50% energized
(SCSI-2 connector spec.’s).
Operating Temperature: -20
°
C to +80
°
C.
Storage Temperature: -40
°
C to +85
°
C.
Shipping Weight: 1.0 pound (0.5Kg), packed.
TERMINATION PANEL: MODEL 5025-552
Type: Termination Panel For Carrier Boards
Application: To connect field I/O signals to the Industrial I/O Pack
(IP). Termination Panel: Acromag Part 4001-040 (Phoenix
Contact Type FLKM 50). The 5025-552 termination panel
facilitates the connection of up to 50 field I/O signals and
connects to the TRANS-200 transition module via a cable
(Model 5028-187). Field signals are accessed via screw terminal
strips. The terminal strip markings on the termination panel (1-
50) correspond to P2 (pins 1-50) on the Industrial I/O Pack (IP).
Each Industrial I/O Pack (IP) has its own unique P2 pin
assignments. Refer to the IP module manual for correct wiring
connections to the termination panel.
Schematic and Physical Attributes: See Drawing 4501-464.
Field Wiring: 50-position terminal blocks with screw clamps. Wire
range 12 to 26 AWG.
Connections to TRANS-200 Transition Module: P1, 50-pin male
header with strain relief ejectors. Use Acromag 5028-187 cable
to connect panel to TRANS-200 transition module. Keep cable
as short as possible to reduce noise and power loss.
Mounting: Termination panel is snapped on the DIN mounting rail.
Printed Circuit Board: Military grade FR-4 epoxy glass circuit board,
0.063 inches thick.
Operating Temperature: -40
°
C to +100
°
C.
Storage Temperature: -40
°
C to +100
°
C.
Shipping Weight: 1.25 pounds (0.6kg) packed.
VME64x TRANSITION MODULE: MODEL TRANS-200
Type: Transition module for AVME9670, AVME9675-4, and
AVME9675-2 boards.
Application: To repeat field I/O signals of IP modules A through D
for rear exit from VME64x card cages. This module is available
for use in card cages which provide rear exit for I/O connections
via 80 mm wide transition modules (transition modules can only
be used in card cages specifically designed for them). It is a
double-height (6U), single-slot module with front panel hardware
adhering to the VME64x bus mechanical dimensions and IEEE
Standard (1101.11-1998), for 80 mm depth. Connects to
Acromag termination panel 5025-552 from the rear of the card
cage, and to AVME9670 & AVME9675 boards within card cage,
via connectors RP0 and RP2.
Schematic and Physical Attributes: See Drawing 4501-760.
Electrical Specifications: 30 VAC per UL and CSA (SCSI-2
connector spec.’s). 1 Amp maximum at 50% energized
(SCSI-2 connector spec.’s).
Field Wiring: Four SCSI-2, 50-pin female connectors (AMP
787082-5 or equivalent) employing latch blocks and 30 micron
gold in the mating area (per MIL-G-45204, Type II, Grade C).
Connects to Acromag termination panel 5025-552 from the rear
of the card cage via round shielded cable (Model 5028-187).
Connections to AVME9670 & AVME9675: Connections are made
though the PC board connectors RP0 (95 pin female with upper
ground shield) and RP2 (160 pin female). The transition module
plugs directly behind the AVME9670 or AVME9675 board into
the VME64x bus backplane within the card cage system.
Mounting: Transition module is inserted into a 6U-size, 80 mm
width slot at the rear of the VME64Xbus card cage. (Directly
behind AVME9670 or AVME9675 board).
Printed Circuit Board: Eight-layer, military-grade FR-4 epoxy glass
circuit board, 0.063 inches thick.
Operating Temperature: -40
°
C to +85
°
C.
Storage Temperature: -40
°
C to +85
°
C.
Shipping Weight: 1.25 pounds (0.6Kg) packed.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
