![background image](http://html1.mh-extra.com/html/acrel/artm-pn/artm-pn_installation-and-operation-manual_2841078016.webp)
安科瑞电气股份有限公司
11
拆下安装位置搭接处的螺丝,将传感器固定在安装位置,对准合金底板的开孔,然后旋紧螺丝
固定,安装完成后打开电池开关。安装实例见下图:
Remove the screw from the joints, and fixing the sensor on the position with the hole on the alloy
baseplate, then tighten the screw, open the battery switch after all of the operation. The installation
examples see images below.
1.4.4.5 ATE200
安装方法
1.4.4.5 ATE200 Installation Method
ATE200
表带式无线测温传感器适用于断路器动触头、静触头、电缆接头、母排等处。
The strap-secured type called ATE200 is suitable for use at moving contacts and fixed contacts of
breaker, cable joints and bus bar.
表带式无线温度传感器结构说明
:
ATE200 structure introduction:
1
——
无线温度传感器主体,测温探头在背面
The core of wireless temperature sensor ATE200,
temperature measuring probe is on the other side
2
——
表带及锁扣
strap and hasp
3
——
电池开关
battery switch
3
1
2
1