In programming mode, used as the Enter button.
Up button,
Down button
In non-programming mode, used to view the fault records.
In programming mode, used to increase or decrease the values, or to
change the protection action status
Self-test button. In operation state, used to start the self-test function of
instrument.
6.3.2 AID10
AID10 has two buttons in total, namely the “Mute”button and “Test”
button.
Key
Functions
Mute button
When there is alarm, press this button to eliminate the alarm sound.
Test button
used to start the self-test function of instrument.
6.3.3 AID150
The centralized alarm and display instrument has five buttons in total, namely the “Mute”button,
“Menu & Enter” shared button, “
”
Up button, “
”Down button, and “Test”
button.
Key
Functions
Mute button
When there is alarm, press this button to eliminate the alarm sound.
Up button,
Down button
In programming mode, used to increase or decrease the value.
Test button
In non-programming mode, used to start the self-test function of
instrument.
Menu & Enter
shared button
In non-programming mode, press this button to enter the programming mode;
In programming mode, used as the Enter button.
6.4 Button operation descriptions
6.4.1 AIM-M10 insulation monitor in non-programming mode
1）Enter operation mode. The default mode of startup is operation mode. The main interface displays
temperature value, insulation resistance value, load rate and current system time.
2)View the alarm record. In the main interface, press the "UP" or "DOWN" to enter the "fault record
query" interface. Press the "enter" button to confirm, and then you can turn the page through the
"down key" or "up key" to query the condition of each fault record in turn. The first record is
the latest record and the tenth record is the oldest record.
3)
Instrument self check. Press the "Test" key, the monitor will start the self-test program to