Installation Instructions
This stove must be installed by a competent person.
Location
• The stove must have a minimum clearance of 50mm to combustible
material on all sides of the appliance.
• The stove should be installed onto a non-combustible hearth base which
is required to be capable of withstanding temperatures of up to 90
degrees. The hearth should be 50mm either side and 250mm in front of
the appliance.
• This appliance is for indoor use only. It is not designed to be installed
outside. The stove must be kept away from any source of damp or moist
conditions. Avoid any close contact with water.
• If there is any doubt about the suitability of the installation site contact
your supplier.
Electrical Work
This product comes complete with a UK 3 pin plug. If the plug is removed for
any reason, it must be wired into an earthed power source. Any alterations to
the cable or power supply must be carried out by a comptent person.
• If the mains socket is to be concealed this can be sited adjacent to the back
of the stove.
• Should the stove be wired directly into the mains supply a double pole
switch fused spur with a 13 amp fuse must be fitted. It is imperative that
the power supply is capable of handling a load of 2000 watts (2kw).
• If the supply cable is damaged in any way it MUST be replaced by a
competent person.
• Do not connect the appliance to an extension lead.
4
