ON/OFF switch on base of stove at the right hand side
Standby
ON/OFF
Flame
Setting
High
Flame
Medium
Flame
Low
Flame
Smoulder
Heater
High
Low
Blue
Flame
ON/OFF
Manual Controls
Operating Instructions
• Plug the stove into the power
supply.
• Switch on the mains power switch
which is located on the base of the
stove on the right hand side. A
standby orange indicator light will
appear on the screen.
• Press the Standby (ON/OFF) button
and the flame picture will appear.
Press this button again to switch the
flame picture off.
• The flame picture has four bright-
ness settings; high, medium, low
and smoulder. This setting can be
altered by pressing the flame setting
button until the desired setting is
achieved.
• Press the heater button once and
the heater will come on low setting.
There will be an orange indicator
light visible on the screen. For the
high setting press the button again
and a red indicator light will appear
on the screen. The indicator light will
remain visible for a few seconds
before disappearing. Press the
button for a third time and the heater
will turn off. The heater will take 30
seconds to slow down and stop.
• The blue flame button turns the
accentuating blue flame on. A
second press will turn the blue flame
off.
11
STANDBY
FLAME
HEATER
BLUE
