Set up
Third time setting Day 1
Press the TIME button several times, to time 3 on the display.
Press SELECT button
Technical Specification
Power Supply
General Power
Heat Power
Flame Effect
220V-240V 50Hz
10W - 2000W
1000W - 2000W
10W - 12W
This appliance has an overheating power cut off
safety feature
Hour will blink. Use the Up/Down Arrows to choose the required hour
then press the SELECT button Minute will blink. Use the Up/Down arrows
to choose the required minutes then press the SELECT button.
Day will blink. Use the Up/Down arrows to choose Day 1 and press SET
Button.
Press SELECT button OFF
Hour will blink.
Use Up/Down arrows to select Hour and press SELECT
Minute will blink.
Use Up/Down arrows to select minutes and press SELECT
Day will blink. Use the Up/Down arrows to choose Day 1 and press SELECT
Button.
Then move on to the next day.
If a third setting is not required set 0 for all the settings
An example of how to program the timer function
is shown below
17
