Ref: IM 031 Rev 00
Date: 15/07/2021
Page
7
/1
7
Property of
Margaritelli Ferroviaria S.p.A.
06135 Ponte San Giovanni - Italy
7
Tools Required
The installation of
RiderPro
requires the following
tools:
Hammer
Measuring
Tape
24 mm
Ratcheting
wrench
17
mm
wrench
and
socket
1/2 in. Drive
10 mm Hex Bit
Socket
High power
c
ordless
impact wrench
and drill
1/2 in. Drive
24 mm Hex
Socket
1/2 in. Drive
Ratchet
Pinch bar
(with tapered
end for
alignments)
7.1
Recommended PPE
In order to ensure the safety of the operations in the
installation of the
RiderPro
, it is recommended to wear
the following ordinary personal protective equipment
(PPE):
•
Safety footwear;
•
Gloves;
•
Hearing protection; and
•
High visibility clothing.
8
Site Establishment
8.1
Traffic Control
Prior to the commencement of any work, the site
should be evaluated for risks to workers, pedestrians
and other road users. The establishment of traffic
control should provide safe travel for passing vehicles
and/or pedestrians and appropriately protect workers
near the roadside.
8.2
Overhead Obstructions
The site should be evaluated for potential overhead
obstructions that may present a risk during the
installation process. These obstructions typically
include power lines, signage or trees.
8.3
Unloading Exclusion Zone
Only appropriate load-rated slings or chains should be
used for safe unloading. It is recommended that an
exclusion zone be maintained around the unloading
process. This provides distance between moving
machinery and workers in the event that goods or the
machinery move unexpectedly.
Unloading and the storing of the product on a level
surface is recommended. Storing product adjacent to
the installation area eliminates the requirement for
workers to carry items over long distances.
12mm high
strength d
rill bit
for carbon steel
