ACP OmniSWD User Manual Download Page 21 | Manualshive

Page: 21 / 34

ACP OmniSWD User Manual Download Page 21

OMNISWD

®

USER MANUAL

19

COPYRIGHT © 2019-2020, ACCELERATED CARE PLUS CORP., ALL RIGHTS RESERVED

User Interface

The OmniSWD

®

utilizes a touch screen to activate selections with the touch of a finger.

All screens and functions can be accessed from this ‘Home’ screen. The “Home” icon in the top left corner of all
other
screens will always return to this screen.

Touching the ‘Indications’ button opens the Indications selection
screen. Here you will find a listing of indications that can be
scrolled through using the up and down arrows.

‘Indications’ buttons:

Relieves pain
Increases local blood flow
Relieves muscle spasm
Decreasing joint stiffness and contractures
Increasing the extensibility of collagen tissues
Chronic Inflammatory Conditions

Touching  the information icon ‘i’ will open a set of screens that
will contain detailed information about the selected indication
including text and pictures describing  parameters and  electrode
placement.

The up/down arrows enable the user to scroll  through the various
pages of applicable information on each topic. The back arrow will
take you back to your starting point.

Touching the highlighted description button in the ‘Indications’
screen will open the treatment screen with preset parameters for the
selected indication.

Once the applicator head has been positioned
over the treatment area, the treatment can be
started by touching the “start” button.

At any time, the treatment output can be
stopped or paused by touching the “stop”
button.

Any fields that are ‘greyed-out’ are not adjustable in this mode
of operation.

Attempting to change  any of the recommended

Δ

T controls will

result in a warning message to communicate that you are attempting
to increase the dosage beyond the recommended dose.

«
...
19
20
21
22
23
...
»

Summary of Contents for OmniSWD



































Reviews:

No comments