10
11
The analogue 3.5mm stereo line output can be used to connect an external amplifier or sub-woofer.
Note that analogue audio signals are prone to picking up interference and this line output should be
limited to 10m.
First fix for line output
E120 can be fitted into a bathroom environment, which is different to most other rooms in the home. The
nature of this wet environment is recognised by the respective standards authorities who test products
in terms of their suitability to be installed in such areas.
E120 compiles with IP54 (Ingress protection).
E120 system is defined as an ‘Extra Low Voltage Installation’, but the wiring needs to be installed in
accordance with ‘Part P’ of the Design and Installation of Electrical Installations. If in doubt, you are
advised to seek assistance from a qualified electrician.
Please refer to the diagram below, E120 should be installed in either zone 2 (light blue) or zone 3 (white).
Bathroom installation guide
Reaching IP54:
E120 is supplied with two rubber gaskets of different thicknesses which should be stuck to the wall side
of the metal frame prior to screwing the frame to the back box. This will create a seal between the frame
and the wall and ensure better water protection. If the wall is flat then the thinner 1mm gasket can be
used, for uneven walls (such as between tile joins) then the thicker 2.5mm gasket can be used.
