background image

4

5

Q Acoustics E120 is an installed DAB, FM, Bluetooth and AUX input Hi-Fi system easily installed into 
your room. It is particularly suited to kitchens, bathrooms* and bedrooms but could equally be used in 
any other room in the house. 

The following instructions assume that you are competent in general electrical installation skills. You 
will need to mount a touch panel into a double gang back box and route cables from this box to the 

speakers and mains. If you are not confident in doing this you should seek professional assistance from 
a qualified electrician. 

It is possible to connect TV sound or another device into the rear auxiliary line input using an additional 
cable. 

*The main E120 wall unit is IP54 rated. It should be located outside zone 2 of the electrical safety zones, 

if in doubt you are advised to seek assistance from a qualified electrician.

Introduction

Package contents

1 x Indoor DAB 

antenna

1 x Plastic stud wall 

installation box

1 x 5m Power supply 

extension cable

2 x 7m speaker cable

1st Fix Package contents:

1 x 3m antenna 

extension cable 

+ adaptor

6 x Rubber grommets 

+ 1 x extraction tool

2.5 Servicing

Servicing is required when the unit or mains cord has been damaged in any way, liquid has been spilled or objects have fallen into 
the apparatus, the apparatus has been exposed to rain or moisture, it does not operate normally, or has been dropped. 

Refer all servicing to qualified service personnel.

3.0 Symbols used on this product

High Voltage Hazard Symbol

Hazard Warning Symbol

Waste Electrical and Electronic 

Equipment Symbol

This symbol indicates uninsulated material within your unit may cause an 
electrical shock. For the safety of everyone in your household, please do 
not remove the product covering.

The ‘exclamation mark’ calls attention to features for which you should 
read this manual closely to prevent operation and maintenance problems.
WARNING: To reduce the risk of fire or electric shock, this apparatus 
should not exposed to rain or moisture and object filled with liquids, such 
as vases, should not be placed on this apparatus.
CAUTION: To prevent electric shock, match wide blade of plug to wide 
slot, fully insert.

This symbol indicates that when the unit is to be discarded, it must 
be separated from other household-type waste and sent to separate 
collection facilities for recovery and recycling of electrical and electronic 
equipment.

Please make sure you are familiar with your local rules on the separate 
collection of electrical and electronic products.

Summary of Contents for E120












Reviews: