background image

2

3

Important safety information and warnings .........................3
Introduction .....................................................................5
Package contents ...........................................................5
E120 System Schematic .................................................7
Planning E120 positioning and back box locations ............8
First fix basic wiring ..........................................................9
First fix for line output .....................................................10
Bathroom installation guide ............................................10
Wiring for two pairs of speakers .....................................12
Second fix .....................................................................13
Removing the E120 wall panel .......................................15
Specification .................................................................14
Warranty .......................................................................15

Contents

Important safety information and warnings

1 Notices

1.1 FCC Statement (for US Customers)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This 
equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna. 
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may 
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause 
undesired operation.

1.2 FCC Radiation Exposure

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be 
installed and operated with minimum distance 20cm between the radiator & your body.

CAUTION! Any Changes or modifications not expressly approved by Q Acoustics could void the user’s authority to operate the 
equipment.

1.3 Industry Canada Statement (for Canadian Customers)

 

This device complies with Industry Canada licence-exempt RSS standard(s). 
Operation is subject to the following two conditions: 
(1) This device may not cause interference, and 
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation 
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et 
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre 
le fonctionnement.

1.4 

Bluetooth

This unit contains a Class 2 

Bluetooth

 transmitter working at 2.4GHz.

2 Safety Information and Warnings

2.1 Moisture

• To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain, moisture, dripping or splashing.
• Do not use this apparatus near water.

2.2 Remote Control Batteries 

The remote control supplied with this unit contains a battery. To prevent battery leakage which may result in bodily injury, property 
damage, or damage to the unit:
• Install the battery correctly, + and - as marked on the unit.
• Remove the battery when the unit is not used for a long time.
• Do not expose the battery or remote control to excessive heat, including sunshine.
• 

CAUTION:

 Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

• 

WARNING - DO NOT INGEST BATTERY - CHEMICAL BURN HAZARD.

• If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries 
away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you 
think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention 

Disposal of Batteries

The battery supplied contains perchlorate material and in many areas batteries may not be disposed of with your household waste. 
Please ensure you dispose of batteries according to local regulations.

The battery supplied does not contain the heavy metals mercury or cadmium.

Summary of Contents for E120












Reviews: