7
• (1) 20 mm round dial scale for SRA / VTA
adjustment at headshell
• (3) special M5 mounting screws with
- (1) 20 mm length
- (1) 25 mm length
- (1) 30 mm length
• (1) set of M5 washer and spring ring
Mounting the
AQUILAR
The
AQUILAR
is mounted with 1 M5 screw
and 1 set of stainless steel washer and spring
ring only.
All you need is a single 5 mm hole in your
armboard to mount the
AQUILAR
on your
turntable.
Please take the
AQUILAR
from its packing
and place it like pictured above.
Now remove the screw in the bottom of
the mounting plate.
Select 1 of the M5 screws in the accessory
box suitable for your armboard. The M5 screw
should be at least 8 mm (1/3”) greater in length
than your armboard’s thickness.
Now take the stainless steel lower mounting
plate and look at it.
The 3 indents have to point upward.
Please take this 50 mm lower mounting plate
and place it onto your armboard with the 3
indents pointing upwards.
The 5 mm center hole should be placed directly
over the 5 mm mounting hole.
Please note:
There is a selection of
mounting plates available to accommo-
date existing arm boards - please ask your
dealer for details.
upper row: SME - slide base
lower row: mounting plates for
Kronos, Jelco, Tri-Planar and Brinkmann
