Acoustic Research Ngara User Manual Download Page 42

Page: 42 / 80

Ngara

User Manual

Remote Operation

The Ngara noise logger provides remote interfacing capabilities through the use of specialised software allowing the

user to -

• Configure logging parameters

• Configure triggering and alarm parameters

• Start/Stop logging sessions

• Display current configuration information

• Display current logger status and results information

• Carry out disk operation

• Calibrate logger



Loggers running software version 5.00 and above must use host software version 2.1 and above.

5.1 Installation of Host Software

The Remote Host Application can be downloaded from the Acoustic Research Labs website. Simply run the executable

installer, clicking

to progress through each configuration option.

An option to

Install

will be provided once all options are set.

The installation should not take any longer than 1 minute.

Version — 25-7cd7566

Page — 42 of 80

Summary of Contents for Ngara

















































































Search results

Summary of Contents for Ngara

Reviews:

Related manuals for Ngara

Brands by name

Popular brands

Acoustic Research Ngara, User Manual

Search results

Summary of Contents for Ngara

Reviews:

Related manuals for Ngara

Brands by name

Popular brands