Acoustic Research Ngara, User Manual

Page: 30 / 80

Ngara
User Manual
Description Setting
IP mode DHCP
Network password
000000
PPTP
Disabled
SNTP
Disabled
FTP
Disabled
UDP
Disabled
USB Power
Constant
Wav Recording 48kHz
Time Weight Fast
Band Pass Low 10 Hz
Band Pass High 1 kHz
Logger state Standby
Triggers Disabled
Auxiliary Output Disabled
Alarms Disabled
Emails Disabled
Noise Cloud
Disabled

This menu item is not accessible when in recording mode.
4.4.10 Exit
This menu item returns to the top-level menu structure.
To return to the top level menu structure, the following steps must be carried out -
1. Activate menu item by pressing
ENTER
4.5 Logging Menu Item (Menu 2)
Items available through the logging menu give the ability to update settings which will affect USB recording opera-
tions.
4.5.1 Start Session
This menu item starts a logging session.
As this session is started through the local interface instead of a remote PC, the session name cannot be entered,
thus Ngara creates a name based on current date and time.
A session will not be able to be started if any of the following conditions are met:
• There is no valid disk found, or
• Logger time has not been set by the RTC due to an internal battery fault
Upon selection of this menu item, the result of trying to start the USB recording session will be displayed to the user.
Previous session settings (Trigger settings, timers, etc) are stored in internal memory and are remembered each time
the unit is turned on.
To start a session using the LCD, the following steps must be carried out -
Version — 25-7cd7566 Page — 30 of 80