WR-G+
54M Wireless Router User Guide
-
35
-
To Reserve IP addresses:
1. Click
the
Add New button
. (Pop-up figure 5-23)
2. Enter the MAC address (The format for the MAC Address is XX-XX-XX-XX-XX-XX.)
and IP address in dotted-decimal notation of the computer you wish to add.
3. Click
the
Save
button when finished.
Figure 5-23 Add or Modify a Address Reservation Entry
To modify or delete an existing entry:
1.
Click the
Modify
in the entry you want to modify.
If you want to delete the entry, click
the
Delete
.
2. Modify the information.
3. Click
the
Save
button.
Click the
Enable All
button to make all entries enabled
Click the
Disabled All
button to make all entries disabled.
Click the
Delete All
button to delete all entries
Click the
Next
button to go to the next page and Click the
Previous
button to return the
previous page.
Note
: The function won't take effect until the router reboots.
5.7 Forwarding
Figure 5-24 The Forwarding menu
There are four submenus under the Forwarding menu (shown in figure 5-24):
Virtual
Servers
,
Port Triggering
,
DMZ
and
UPnP
. Click any of them, and you will be able to
configure the corresponding function. The detailed explanations for each submenu are
provided below.
5.7.1 Virtual Servers
Virtual servers can be used for setting up public services on your LAN, such as DNS,
Email and FTP. A virtual server is defined as a service port, and all requests from the
Internet to this service port will be redirected to the computer specified by the server IP.