1 - 1 8
1 - 1 8
1 - 1 8
1 - 1 8
1 - 1 8
Bhapter 1
B
IOS Set
t
p
Bhapter 1
B
IOS Set
t
p
Bhapter 1
B
IOS Set
t
p
Bhapter 1
B
IOS Set
t
p
Bhapter 1
B
IOS Set
t
p
Modem Use IRQ
This determines the IRQ, which can be applied in Modem
use.
The Choices: 3
(default), 4/5/7/9/10/11/NA.
Soft-Off by PWRBTN
Pressing the power button for more than 4 seconds forces
the system to enter the Soft-Off state when the system has
“hung”.
The Choices: Instant-Off
(default), Delay 4 Sec.
CMOS Setup Utility-Copyright (C) 1984-2001 Award Software
IRQ / Event Activity Detect
PS2KB Wakeup Select
Hotkey
Item Help
PS2KB Wakeup From S3/S4/S5
Disabled
VGA
OFF
Menu Level
LPT & COM
LPT/COM
HDD & FDD
ON
PCI Master
OFF
PowerOn by PCI Card
Disabled
Modem Ring Resume
Disabled
RTC Alarm Resume
Disabled
Date (of Month)
0
Resume Time (hh:mm:ss)
0 0 0
IRQs Activity Monitoring
Press Enter
←→↑↓
: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F1:General Help F5:Previous Values F6:Fail-Safe Defaults
F7:Optimized Defaults
IRQ / Event Activity Monitoring
If you highlight the “Press Enter” next to the “Wake Up
Events” label and then press the enter key, it will take you
to a submenu with the following options:
VGA
When set to On, any event occurring at a VGA port will
awaken a system which has been powered down.
LPT & COM
When set to On, any event occurring at a COM(serial) /
LPT (printer) port will awaken a system which has been
powered down.